Why is my Setra FLEX not alarming?

There are several things to check on the Setra FLEX to ensure you are set up to ALARM.

• First, be sure the room is not in STANDBY mode. You can go to the PROFILE list and check the status there.
• Under the ROOM tab make sure that the parameter you want to alarm is ENABLED.
• Next go to the ALARM setup and make sure the lo and/or hi alarms are ENABLED.
• In the ROOM PROFILE screen, make sure the ALARM ENABLE is ENABLED.
• In the ALARM SETTINGS screen make sure the AUDIBLE ALARM is ENABLED.